What is Superclones.cn and what watches do they sell?

Superclones.cn is a specialist superclone watch retailer offering 1:1 precision clones of Rolex, Audemars Piguet, and Patek Philippe. Their catalogue includes the Rolex Daytona, AP Royal Oak Chronograph, and Patek Philippe Nautilus superclones.

What is a Superclone Patek Philippe Nautilus?

A Superclone Patek Philippe Nautilus is a 1:1 precision replica of the Nautilus reference, built with a high-grade movement replicating the original calibre, precise case geometry, and faithful dial finishing.

Does Superclones.cn sell the best superclone watches?

Yes. Superclones.cn curates only the highest-grade factory production — precision clones with 1:1 case dimensions, original-specification movements, and verified finishing quality across all listed references.

What movement is used in the AP Royal Oak Superclone at Superclones.cn?

The Audemars Piguet Royal Oak Superclones at Superclones.cn use a high-grade clone of the Cal.3120 or Cal.3126 depending on the variant, with accurate chronograph complications where applicable.

Are Superclones.cn watches shipped internationally?

Superclones.cn ships internationally. Contact the store directly through the website for current shipping destinations, delivery timelines, and payment options.

Superclone Audemars Piguet Guide — Best 1:1 Replica AP Watches

2 days ago
3 min read

Superclone Audemars Piguet — The Complete Guide to 1:1 Replica AP Watches

Audemars Piguet is the most technically demanding brand to reproduce at the superclone level — the octagonal bezel with its eight individual hex screws, the Grande Tapisserie hobnail guilloché dial, the integrated bracelet, and the ultra-thin movement architecture all require precision that pushes the limits of what superclone production can achieve. When it is achieved correctly, an AP Royal Oak superclone is one of the most impressive pieces in the market. This guide covers every major AP reference in the superclone catalog.

Why AP Is Challenging — and Why the Challenge Is Worth It

The Royal Oak's octagonal bezel requires eight individually fitted hex screws that sit flush to the bezel surface. Each screw is visible at the front of the watch and contributes to the geometric precision of the bezel face. In the genuine piece, each screw is torqued to a specific tension to ensure flush seating and consistent spacing. Reproducing this to the superclone standard requires individual case machining and manual fitting — there are no shortcuts.

The reward for this complexity is that a correct Royal Oak superclone is one of the most visually impressive watches in the replica market. The Grande Tapisserie dial catches light in ways that most watch designs cannot replicate, and the integrated bracelet taper creates a wrist feel that is genuinely distinctive.

Royal Oak Chronograph — The Technical Showcase

The Royal Oak Chronograph (reference 26331 in current form) adds a column-wheel flyback chronograph to the Royal Oak architecture. The 41mm case accommodates the pushers at 2 and 4 o'clock without disrupting the octagonal bezel geometry. The chronograph sub-dials at 3, 6, and 9 o'clock are laid out on the Tapisserie dial in a clean tri-compax arrangement.

This superclone reproduces the full chronograph specification: the pushers engage smoothly, the column-wheel visible through the dial is replicated, and the overall 10.7mm case thickness is maintained. The integrated bracelet uses the correct proportions and correct clasp mechanism.

Royal Oak Extra-Thin — Purity of Form

The Extra-Thin (reference 15202 in current form) is the Royal Oak at its most distilled — the original 1972 Genta concept without additional complications. The 39mm case at 8.1mm thickness represents the ultimate expression of what the Royal Oak design achieves. This superclone captures the extra-thin case profile, the correct movement clone architecture, and the full Grande Tapisserie dial execution.

Royal Oak Offshore Diver — Depth and Performance

The Offshore Diver (26470ST) takes the Royal Oak Offshore architecture and adds 300m water resistance with a unidirectional rotating bezel. At 42mm and 14.4mm thick, it is the most robust watch in the AP portfolio. The superclone version reproduces the Offshore Diver with correct crown guards, ceramic bezel insert, and the rubber strap integration that defines the Diver aesthetic.

Frequently Asked Questions

What makes AP Royal Oak the most expensive replica to produce?

The bezel with eight individual hex screws requires the highest manufacturing precision of any common superclone reference. The Grande Tapisserie dial pattern requires a dedicated CNC tool for each production run. The integrated bracelet taper requires individual link-fitting quality control. All three elements must be correct simultaneously for the piece to qualify as a genuine superclone.

What dial colours are available for the Royal Oak superclone?

Blue, black, white, grey, and silver Tapisserie are the most common dial configurations. Blue is the most iconic and sought-after. Check individual product listings for available dial colour options.

Is the AP bracelet integrated or interchangeable?

The Royal Oak bracelet is integrated — it attaches to the case through a flush connection designed as part of the case architecture. It is not interchangeable with standard strap bars without modification.

What size is the Royal Oak Chronograph?

41mm case diameter, 10.7mm case thickness. These dimensions are reproduced on the superclone to the 1:1 specification.

How do Royal Oak superclones compare to Rolex superclones in quality?

Royal Oak superclones are held to the same material standards (904L steel, sapphire crystal) but the dimensional complexity is higher. The highest-grade AP superclones from top factories match or exceed Rolex superclone quality. Lower-grade AP reproductions tend to fail on bezel screw alignment and Tapisserie dial definition.